A site supervisor scans an equipment tag and reports a fault. The screen says “Submitted”. If the selling point is that the report reaches the right maintenance team, the viewer still needs to see it arrive in that team’s queue.
That’s the kind of gap a good product demo video brief catches before production starts. It gives the team one task to show, the steps the viewer needs to see and the evidence that will tell them it worked. Use these nine details to brief a filmed demonstration, a software walkthrough or a video that combines footage and animation. The fault-reporting app is an illustrative example you can adapt to your own product.
Table of Contents
1. The use case you want to demonstrate
Write down one task, who performs it and what prompts them to act. “Show our maintenance platform” leaves the production team to choose from dozens of features. “Show a site supervisor reporting a fault from beside a machine during a shift” gives them a situation they can plan and film.
Include any condition that changes what the viewer needs to see. If the supervisor has to report the fault without knowing which team owns the machine, show how the report gets routed. If the equipment already needs to be registered, say so. The audience needs enough context to judge whether the workflow would fit their own operation.
2. The audience and the question they need answered
Identify the person who will watch and the decision the demo should help them make. A supervisor might want to know how much they need to type on a phone. A maintenance manager might want to see where the report appears and what information comes through. A short video can serve both if it follows the same workflow and shows each person’s part.
Ask your sales or support team what customers still ask after seeing the product. Use their wording in the brief. For example, “How does my team know it’s got the right machine?” gives you a specific detail to demonstrate. You can also find those questions by reviewing what buyers tell you in customer interviews.
3. The product version and what’s ready to show
Specify the product model, software version or prototype the crew will work with. For a physical product, confirm which unit will be available, which accessories it needs and who can demonstrate it. For software, set up an approved demo account with representative sample records and the right permissions. If two user roles appear in the workflow, check that both accounts are ready.
Run through the sequence before filming or recording. You may need to reset the product between takes, return the demo account to its starting state or wait for a feature to be enabled. Name the person who can prepare that setup. If the interface or product design is about to change, agree which version the video should represent before you capture it.
4. The steps the viewer must see from start to finish
List the starting situation, the essential actions and the visible result. Include setup steps that matter to the buyer’s decision. Leave routine steps such as logging in out of the main sequence unless they answer a question the viewer is likely to have.
| Moment | What the viewer sees | What it helps them understand |
|---|---|---|
| Start | The supervisor scans the equipment tag and the matching machine record opens. | How the report is linked to a specific machine. |
| Action | They add a description and a photo, then submit the report. | What the supervisor needs to provide. |
| Result | The same report appears in the maintenance team’s queue, with the machine ID and photo. | Where it goes and what information the team receives. |
Ask the product specialist to walk through those steps with the producer. If an approval or manual handover happens between submission and receipt, show it or explain it. That missing step could be the detail the buyer needs most.
5. The evidence that supports the selling point
Write down each claim the video needs to support and what you can show for it. If the claim is that a report reaches the right team, show its arrival in the assigned queue. A submission confirmation only establishes what the supervisor sees at their end. If you claim the task takes a specific amount of time, record it under stated conditions and keep a take you can use to check the timing. A sequence edited for pace can still show the workflow clearly.
Include any important dependency in the brief, such as a particular accessory, integration or permission. At storyboard review, ask someone unfamiliar with the product to point to the moment that supports the main claim. If they can repeat the voiceover but can’t identify the evidence, revise what the camera or screen needs to show.
6. How you’ll show each important action
Choose the visual approach around what the buyer needs to see. Film a real person when scale, handling or the working environment matters. Record the screen directly when the viewer needs to read labels or see a change in status. Use animation when the important action happens inside a product or needs illustrating in a way footage can’t capture.
For the fault report, you might film the supervisor scanning the tag, then use a direct screen recording so viewers can read the machine ID and follow the submission. Show the matching report in the maintenance view so the audience can tell it’s the same job. For more ways to choose what to film or illustrate, see seven creative ways to explain a complex product.
7. Where the video will be used and what happens next
Give each version a job. On a product page, the demo might help a first-time visitor decide whether to book a walkthrough. After a sales call, it might help a prospect show a colleague how a particular feature works. A video playing on an exhibition stand may need to make sense to someone who joins halfway through.
Write down what the viewer should do next, such as book a demo, check compatibility or share the clip with their operations team. If you have an approved customer interview that explains why the workflow matters, you can pair that extract with the demonstration in a follow-up. One gives the prospect context and the other shows the product in action. See our guide to using podcast content during the B2B sales process.
8. The final files and accessibility requirements
List the edits you need, where they’ll play and any requirements for captions, languages or accompanying text. If you need a website version and a vertical cut, flag both before filming. A shot framed to show a hand and a machine side by side may need a separate angle for a narrow screen. A software walkthrough may need a tighter crop so the relevant buttons remain readable.
Plan how viewers will follow the demonstration when they can’t hear the audio or see small details. If the success message only appears in the interface, describe it in the narration or in text supplied with the video. Check captions for product names and technical terms, and test the cut on the device or display where it will be used. See the W3C guide to planning accessible audio and video.
9. Who checks product accuracy, who signs off and when
Name the person who can confirm that the product behaves as shown. Ask them to review the planned steps and wording before filming, then check the rough cut. A technically accurate sequence can still give the wrong impression if the edit removes an important condition or makes two steps appear to happen in a different order.
Agree who approves the finished video, the budget or range the team should work within, and when you need the files ready for use. List any dates the project depends on, such as the arrival of a production unit, access to a site or a software release. If the shoot involves staff, a working site or limited access, use our questions to ask a corporate video production company to check how the crew will handle it.
Copy this product demo video brief template
Fill in the fields you know. For anything still open, name who can confirm it and when. A production team can then tell you what it can scope now and what depends on further information.
Audience and decision [Audience] needs to know [buyer question] before they can [decision or next action].
Workflow and proof Start with [situation], show [essential actions] and finish on [visible result]. We can show [evidence] to support [claim], under [conditions].
Product and materials Use [model, version or prototype]. We can provide [product, demo account, location, contributor or existing assets] by [date].
Outputs and approvals We need [versions and accessibility requirements] for [channels]. [Name] checks product accuracy and [name] approves the edit. The files need to be ready by [date]. Our working budget is [amount or range].
Talk through your product demo with Echo Eight Studio
Send us the question your buyers keep asking and any material that shows how the product works. A rough phone video, a screenshot or a model can give us a starting point. We’ll discuss what the audience needs to see and whether filming, animation or a combination would help. Explore our video production and product demonstration services or talk through your product demo brief with Echo Eight Studio.
Frequently asked questions about product demo video briefs
How long should a product demo video be?
Give the viewer enough time to see the essential action and recognise the result. On a product page, that might mean showing one workflow and offering a longer walkthrough for buyers who want more detail. In a sales follow-up, you may need to include setup or the exception a prospect asked about. Test the rough cut before deciding what to trim.
What is the difference between a product demo video and an explainer video?
An explainer helps viewers understand an idea, product or process. A demo shows the product carrying out a specific task or producing a result. Some videos do both. A short introduction might explain why a maintenance team misses reports, then the demonstration shows how one report reaches the correct queue.
Do I need a script or storyboard before briefing a production company?
You can start with a workflow outline and the result the buyer needs to see. A script can then settle what is said, while a storyboard shows what appears at each moment. Even a few rough frames can reveal that a key step has no suitable footage or that a screen needs to be recreated before production.
Can you make a product demo video before the product is finished?
Yes. You can use a working prototype, a staged interface or an animation to demonstrate the intended experience. Decide which parts are confirmed and label any simulated behaviour clearly. If the product’s appearance or operation may change before launch, plan which scenes can be replaced without rebuilding the whole video.
What affects the cost of producing a product demo video?
Costs depend on what needs preparing and showing. A screen recording from a ready demo account and a film that needs a site, a contributor and a 3D cutaway involve different work. For a useful quote, list the must-show steps, what your team can supply and the final versions you need. Ask for optional scenes or versions to be priced separately.
Can I create several product demo videos from one shoot?
Often, if you plan the separate videos before recording. Give each one a task and an ending, then identify which shots they can share. An overview and a feature clip may use the same footage of the product, but the feature clip may need its own close-up and a different opening. Ask the producer to allow for those shots in the schedule.
How can I tell whether my product demo video is working?
Check whether viewers can answer the question you wrote in the brief. Ask a few people who resemble your buyers to explain what happened and what they’d still need to verify. After publishing, ask sales whether prospects still raise the original question or move on to a more specific one. View counts tell you how much the video was watched and can sit alongside that feedback.